Type of Document Dissertation Author Abed, Farid H Author's Email Address firstname.lastname@example.org URN etd-07062005-094112 Title Physically Based Multiscale-Viscoplastic Model for Metals and Steel Alloys: Theory and Computation Degree Doctor of Philosophy (Ph.D.) Department Civil & Environmental Engineering Advisory Committee
Advisor Name Title George Voyiadjis Committee Chair Anthony Palazotto Committee Member Su-Seng Pang Committee Member Suresh Moorthy Committee Member Erwin Poliakoff Dean's Representative Keywords
- multiscale modeling
- strain rate and temperature effect
- shear banding and necking
- dislocation density
- constitutive modeling
Date of Defense 2005-06-13 Availability unrestricted AbstractThe main requirement of large deformation problems such as high-speed machining, impact, and various primarily metal forming, is to develop constitutive relations which are widely applicable and capable of accounting for complex paths of deformation. Achieving such desirable goals for material like metals and steel alloys involves a comprehensive study of their microstructures and experimental observations under different loading conditions. In general, metal structures display a strong rate- and temperature-dependence when deformed non-uniformly into the inelastic range. This effect has important implications for an increasing number of applications in structural and engineering mechanics. The mechanical behavior of these applications cannot be characterized by classical (rate-independent) continuum theories because they incorporate no ‘material length scales’. It is therefore necessary to develop a rate-dependent (viscoplasticity) continuum theory bridging the gap between the classical continuum theories and the microstructure simulations.
Physically based vicoplasticity models for different types of metals (body centered cubic, face centered cubic and hexagonal close-packed) and steel alloys are derived in this work for this purpose. We adopt a multi-scale, hierarchical thermodynamic consistent framework to construct the material constitutive relations for the rate-dependent behavior. The concept of thermal activation energy, dislocations interactions mechanisms and the role of dislocations dynamics in crystals are used in the derivation process taking into consideration the contribution of the plastic strain evolution of dislocation density to the flow stress of polycrystalline metals. Material length scales are implicitly introduced into the governing equations through material rate-dependency (viscosity).
The proposed framework is implemented into the commercially well-known finite element software ABAQUS. The finite element simulations of material instability problems converge to meaningful results upon further refinement of the finite element mesh due to the successful incorporation of the material length scale in the model formulations. It is shown that the model predicted results compare very well with different experimental data over a wide range of temperatures (77K°-1000K°) and strain rates (10-3-104s-1). It is also concluded from this dissertation that the width of localization zone (shear band) exhibits tremendous changes with different initial temperatures (i.e., different initial viscosities and accordingly different length scales).
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access Abed_dis.pdf 3.35 Mb 00:15:29 00:07:58 00:06:58 00:03:29 00:00:17
If you have questions or technical problems, please Contact LSU-ETD Support.